Showing posts with label Life's a Beach. Show all posts
Showing posts with label Life's a Beach. Show all posts

Monday, August 5, 2013

Cards in Envy - Rev It Up!

Welcome to an another Cards in Envy Challenge!  For this challenge we are to create an A2 sized card (5.5" x 4.25") that has something with an engine - like a car, truck, motorcycle or an airplane - the choice is yours.  Only requirement is that the card is 1/4" or less in thickness in order to fit in an envelope.

For my card, I chose to create a submarine.   And of course it had to be yellow - that way I could sing "we all live in a yellow submarine . . ." while it was being made.

Designer Paper = Echo Park Dots and Stripes Bundle of Joy - Boy; 6" x 6" pack.
Cricut cartridge = Life is a Beach


A2 sized card = 5.5" x 4.25"
Cricut Life is a Beach cartridge

Card Recipe:
  • Mat 1 (yellow solid) = 5 3/8" x 4 1/8".
  • Mat 2 (blue solid) = 4 7/8" x 3 5/8".
  • Mat 3 (blue chevron pattern) = 4.75" x 3.5".
  • Mat 4 (blue solid) = 4 5/8" x 2 5/8".
  • Mat 5 (blue / white polka dots) = 4.5" x 2.5".
  • Mat 6 (blue border with sentiment) = 7/8" x 2 5/8".  White gel pen used for stitching.
  • Sentiment "Best Fishes" = from My Pink Stamper "More Punny-licious" stamp set.  Sentiment has been heat embossed.


  • Submarine = cut at 2" from Cricut Life is a Beach cartridge; [Submarine] found on page 58 of the folder.  White gel pen used for stitching.  Back end of submarine has foam tape (where it extends off of the mat).
  • Starfish = cut at 1.75" from Cricut Life is a Beach cartridge; [Starfish] found on page 65 of the folder.  Starfish has been inked with Tim Holtz Tea Dye Distress Ink.  Mod Podge Dimension added to top.
  • Seaweed = cut at 2.25" (real dial size) from Cricut Life is a Beach cartridge; [Seaweed-s] found on page 69 of the folder.  Seaweed inked with Tim Holtz Tea Dye Distress Ink.
Inside of Card
Inside of Card:
  • Mat 1 (blue solid) = 5" x 3.75".
  • Mat 2 (yellow striped) = 4.75" x 3.5".
  • Mat 3 (white) = 4.5" x 3.25".


  • Anchor = cut at 1" from Cricut Life is a Beach cartridge; [Anchor] found on page 76 of the folder.  Turquoise twine has been wrapped around and glued to card.

Need more inspiration?  Head on over to Cards in Envy to see all the great cards made by the Design Team.  I can't wait to see your card!

This card also entered into the Paper Playtime Use Yellow Challenge.

Thursday, June 27, 2013

Too Cool

You're too cool!

A2 sized card = 5.5" x 4.25"
Card Recipe:
  • Mats = cut at 5.25" x 4" and cut on diagonal.  Paper from My Mind's Eye "Oxford Lane" 6x6 pack.  Edges inked with Tim Holtz Tea Dye Distress Ink.
  • Twine = from the Paper Studio.
  • Sentiment "You're too COOL!" = from Scrappy Moms "Amusing Animals" stamp set.

Cricut Life is a Beach cartridge
  • Surf Board = cut at 3" from Cricut Life is a Beach cartridge; found on page 74 of the folder. 
  • Swim Suit = cut at 1.5" from Cricut Life is Beach cartridge; found on page 62 of the folder.  Edges inked with Tim Holtz Tea Dye Distress Ink.  Buttons have fold stickles covered with Glossy Accents.

  • Flip Flops = cut at 1.25" from Cricut Life is a Beach cartridge; found on page 64 of the folder.
  • Swim Suit = cut at 1.75" from Cricut Life is a Beach cartridge: found on page 63 of the folder.

Inside of Card
Inside of Card:
  • Mat 1 (yellow) = 5" x 3.75".
  • Mat 2 (beige) = 4.75" x 3.5".

  • Surf Board = cut at 3" from Cricut Life is a Beach cartridge; found on page 74 of the folder. 

Sunday, June 23, 2013

Treasure You

I Treasure You!

Cricut Life is a Beach
Cricut Create a Critter
Cricut Elegant Edges
Card Recipe:
  • Mat 1 (pattern) = 5 3/8" x 4 1/8".  Paper from Authentique "Summer" 6x6 pack.  Edges inked with Tim Holtz Faded Jeans Distress Ink.
  • Mat 2 (blue) = 4.75" x 3.5".  Paper from Authentique "Summer" 6x6 pack.  Edges inked with Tim Holtz Faded Jeans Distress Ink.
  • Mat under Treasure Chest = cut at 3" from Cricut Elegant Edges cartridge; found on page 36 of the folder.  Mat is mounted with foam tape.  Edges inked with Tim Holtz Faded Jeans Distress Ink.
  • Wave Border = cut at 1.25" from Cricut Life is a Beach cartridge; found on page 45 of the folder.  Edges inked with Tim Holtz Faded Jeans Distress Ink.  White gel pen used for stitching.
  • Treasure Chest = cut at 2" from Cricut Life is a Beach cartridge; found on page 75 of the folder  Edges inked with Tim Holtz Antique Linen Distress Ink.  White gel pen used for the stitching.
  • Sea Weed = cut at 1.25" from Cricut Create a Critter cartridge; found on page 43 of the folder.  Edges inked with Tim Holtz Pealed Paint Distress Ink.  White gel pen used for the stitching.
  • Sea Stars = cut at .25" from Cricut Create a Critter cartridge: found on page 41 of the folder.  Brown colored pencil used to make accents.

Inside of Card
Inside of Card:
  • Mat 1 (blue) = 5" x 3.75".
  • Mat 2 (white) = 4.75" x 3.5".

  • Fish = cut at 1" from Cricut Create a Critter cartridge; found on page 43 of the folder.  I only used the first cut and the first layer cut.  Paper from Authentique "Summer" 6x6 pad.  Edges inked with Tim Holtz Faded Jeans Distress Ink.  Black gel pen used for eye and stitching on tail of fish.

Saturday, June 1, 2013

ODB Water Challenge


Our Daily Bread : Challenge for June 2013 is Water

Ahoy!  Out to Sea!

Cricut Cartridge:  Boys Will Be Boys and Life is a Beach.
Card Stock:  Recollections Primary Pin Dot Card Stock.


A2 sized card = 5.5" x 4.25
Card Recipe:
  • Mat 1 (red) = 5 3/8" x 4 1/8".  Edges inked with Tim Holtz Tea Dye Distress Ink.
  • Mat 2 (white) = 5" x 3.75".  Mat embossed with Cuttlebug Spots and Dots folder.
  • Mat 3 (red border) = 4 3/8" x 2 3/8".  Edges inked with Tim Holtz Tea Dye Distress Ink.
  • Mat 4 (blue and white polka dot) = 4.5" x 2.5".

Cricut Boys Will Be Boys cartridge
  • Sailboat = cut image and shadow at 3" from Cricut Boys Will Be Boy cartridge; found on page 77 of folder.  Red portion inked with Tim Holtz Tea Dye Distress Ink.  Image is mounted with foam tape.

  • Twine = from the Paper Studio.  Knot is glued to card to prevent it coming off.

Inside of Card
Inside of Card.
  • Mat 1 (blue and white polka dot) = 5" x 3.75".
  • Mat 2 (white) = 4.5" x 3.5".

Cricut Life is a Beach cartridge
  • Helm = cut at 1.5" from Cricut Life is a Beach cartridge; found on page 76 of the folder.
 
 
  

Thursday, May 16, 2013

MCCR - Water Things


The theme for My Cricut Craft Room today is Festive Water Things.  I created an underwater scene card using Cricut cartridges Create a Critter and Life is a Beach.


A2 sized card = 5.5" x 4.25"
Create a Critter
Life is a Beach
 Card Recipe:
  • Mat 1 (light blue) = 5 3/8" x 4 1/8".  Mat has been embossed using Cuttlebug Spots and Dots folder.
  • Water = cut at 5 3/4" from Create a Critter found on page 43 of the folder.  I cut on at 5" that was too small, so I just layered that underneath, which created the multiple waves.  Top of Water is inked with Tim Holtz Faded Jeans Distress Ink.  Paper is from Recollections Primary Pin Dot Card stock.
  • Sand = Cut two at 5 3/4" from Create a Critter found on page 43 of the folder.  You'll need two because one is too short to fit card.  Top of Sand inked with Tim Holtz Antique Linen Distress Ink.


Close up of Fish and Water Bubbles

  • Fish = cut at 3/4" from Create a Critter found on page 43 of the folder.  I opted not to use Layer 2 or Layer 3 for my fish.  Tail of fish has Liquid Pearls. 
  • Water Bubbles = cut two at 1/2" and one at 3/4" from Create a Critter found on page 43 of folder.  (top layer for the sand dollar) I used the same light blue paper as the background.  I added Mod Podge Dimensional Magic to top and let dry overnight before adding to the card.  Once is dries it becomes clear and has little air bubbles in it.  Fish is mounted with foam tape.


Close up of Sun

  • Sun = cut at 1 3/4" from Create a Critter found on page 52 of the folder.  Outer edge of sun has Stickles added to it.  Sun is mounted with foam tape.


Close up of Treasure Chest

  • Kelp = cut at 1 3/4" from Create a Critter found on page 42 of the folder.  Edges inked using Tim Holtz Peeled Paint Distress Ink. 
  • Seahorse = cut at 1 1/4" using the "flip button" from Create a Critter found on page 42 of folder. 
  • Starfish = cut at 3/4" from Create a Critter found on page 41 of folder.  I didn't use the layer for mine.  Starfish has Liquid Pearls added.
  • Treasure Chest = cut at 1 1/2" from Life is a Beach found on page 75 of the folder.  Gold Stickles and Liquid Pearls added.  Treasure Chest has one layer of foam tape on bottom and two layers of foam tape on lid.
  • "Jewels" in Treasure Chest = bling from my stash.  Purchased at Michael's.


Close up of Star Fish

  • Coral = cut at 1 1/2" from Create a Critter found on page 43 of folder.  Purple Stickles has been added to it.
  • Seahorse = cut at 1 1/4" from Create a Critter found on page 42 of folder.


Inside of Card
Create a Critter
Life is a Beach
 Inside of Card:
  • Mat 1 (blue) = 5" x 3.75".
  • Mat 2 (beige) = 4.75" x 3.5".
  • Coral = cut at 1 1/4" from Create a Critter found on page 43 of folder. Purple Stickles has been added to it.
  • Starfish = cut at 3/4" from Create a Critter found on page 41 of folder. I didn't use the layer for mine. Starfish has Liquid Pearls added.
  • Anchor = cut at 1 1/2" from Life is a Beach found on page 76 of the folder.
Inspiration for this card came from Live Love and Scrap.



Monday, May 6, 2013

Summer Fun

Fishing you a great day!

Operation Write Home VCMP - Summertime!

A2 sized card = 5.5" x 4.25"
Cricut Life's a Beach
Card Recipe:
  • Mat 1 (light green) = 5 3/8" x 4 1/8".
  • Mat 2 (wave pattern) = 5.25" x 4".  Paper from the Paper Studio "A Day at the Beach."
  • Scuba Diver = cut image at 2.75" from Cricut Life's a Beach cartridge; found on page 51 of the folder.  Mask on face created using Mod Podge Dimensional Magic.  Layer on scuba diver cut three times to get different colored elements for fins, swim trunks and hair. (light green, blue and brown).
  • Fish Group = cut at 2" from Cricut Life's a Beach cartridge: found on page 53 of the folder.  Colored paper added to back to create eye colors.  Red fish is mounted with foam tape.  Fish image cut three times to get the different colored fish (in red, blue and green).
  • Bubbles = drops from Mod Podge Dimensional Magic.
  • Sentiment "Fishing you a great day" = from Scrappy Mom's "Amusing Animals" stamp set.

Inside of Card
Cricut Life's a Beach
Inside of Card:
  • Mat 1 (light green) = 5" x 3.75".
  • Mat 2 (white) = 4.75" x 3.5".
  • Fish = extra fish from cuts on front of card.  Cut at 2" from Cricut Life's a Beach cartridge: found on page 53 of the folder.



Saturday, March 2, 2013

G'day Mate

A2 sized card = 5.5" x 4.25"
Cricut Life's a Beach
Cricut Mini Monograms
Inspiration for this card came from here, found on Pinterest.

Here's how I made my card:
  • Mat 1 (solid orange) = 5.25" x 4".
  • Mat 2 (checkered pattern) = 5" x 3.75".  DP from DCWV Mainstreet Stack.  Edges of mat are inked with Tim Holtz Peeled Paint Distress Ink.
  • Pelican = cut at 2.5" from Cricut Life's a Beach cartridge; <Pelican> found on page 78 of the folder.   Eye of pelican is Viva Decor Pen "Black".  Pelican is mounted on foam tape.
  • Shrubs and stump pelican is perched upon = cut at 2.5" from Cricut Life's a Beach cartridge; <Shrubs> found on page 78 of folder.  Pattern paper on shrubs is from DCWV Mainstreet Stack.  Edges of cuts inked with Tim Holtz Peeled Paint Distress Ink.  Multiple cuts made with different pattern paper to create the layers of shrubs.
  • Seagulls = cut at 2.25" from Cricut Life's a Beach cartridge; <Seagulls-s> found on page 79 of folder.   Edges of seagulls inked with Tim Holtz Peeled Paint Distress Ink.
  • Scallop behind sentiment = cut at 1.5" from Cricut Mini Monograms cartridge; <crclsclp> found on page 129 of folder.
  • Circle behind sentiment = 1" circle punch from Martha Stewart punch. Edges of circle inked with Tim Holtz Peeled Paint Distress Ink.
  • Sentiment "G'day mate!" = from Scrappy Mom "Amusing Animals" stamp set.  Memento Tuxedo Black ink used.
  • Ribbon = from Michaels.

Inside of card
Cricut Life's a Beach
Inside of card.
  • Mat 1 (solid orange) = 5" x 3.75".
  • Mat 2 (solid beige) = 4.75" x 3.5".  Edges of mat inked with Tim Holtz Peeled Paint Distress Ink.
  • Shrub = extra cut from front of card.  Edges inked with Tim Holtz Peeled Paint Distress Ink.  DP from DCWV Mainstreet Stack.
2nd version of same card
Another version of same card and cuts.  Pelican and Stump were cut at 2.25".  Twine used instead of ribbon and there are no seagulls.  Sentiment moved to side of stump.

Inside of 2nd card. 

Inside of 2nd card.  Border created from scraps of pattern paper.  Pattern paper cut at 1" and punched on both sides with EK Success Scalloped Scallop punch. 

Card created for Our Daily Bread March 2013 Challenge and Operation Write Home.

Friday, July 13, 2012

Hit the Beach!

Scappy Mom's Stamps:  Terrific Tuesday Challenge! This weeks theme is "Hit the Beach" - we want to see your beach themed projects from cards to layouts to 3D items.

Diaper cake made using Create a Critter Cricut & Paper Doll Dress Up Cricut cartridges. Paper colors are from Imagine More Cards Cricut cartridge. 


Close up of wash cloth octopus and seahorse. Mermaid from Paper Doll Dress Up Cricut cartridge.


Cake board for use under this diaper cake.


Life Perserver imaged from Life's a Beach Cricut cartridge (9 inches). Letter "G" from Storybook Cricut cartridge (4 inches)

Stickles added to Life Perserver. Initial highlighted with Glossy Accents and glitter. Colors from Imagine More Cards Cricut cartridge.


Baby card to go with this gift. Fish bowl cut at 4" from Create a Critter Cricut cartridge. Fish cut at 1". Colors are from Imagine More Cards Cricut cartridge.